|
|
Project: Adapt CV 06 Mini to Dead Shop Vac Barrel
Date: 08/04/2007
Views: 762
|
|
Flip Side of OEM Lid, Filter Removed
Date: 08/04/2007
Views: 691
|
|
Original Latch / Handle & Lip Seal Closeup
Date: 08/04/2007
Views: 579
|
|
Barrel Lip Closeup
Date: 08/04/2007
Views: 550
|
|
|
Original Inlet / Outlet Port Configuration
Date: 08/04/2007
Views: 505
|
|
Closeup of Original Fan / Motor / Plenum Configuration
Date: 08/04/2007
Views: 559
|
|
Motor, Upper Steel Plate Removed
Date: 08/04/2007
Views: 530
|
|
Testing the Concept
Date: 08/04/2007
Views: 711
|
|
|
View Looking Down Through Cyclone
Date: 08/04/2007
Views: 592
|
|
Cause Of Motor Failure
Date: 08/04/2007
Views: 664
|
|
Preparing the Lid: Plug Unused Screw Hole
Date: 08/04/2007
Views: 541
|
|
Preparing the Lid: Straightening Some Metal
Date: 08/04/2007
Views: 522
|
|
|
Painted, Gasket Prepared, Ready for Installation
Date: 08/04/2007
Views: 578
|
|
Gasket Installed on Painted Lid
Date: 08/04/2007
Views: 569
|
|
Installation of New Lip Gasket
Date: 08/04/2007
Views: 575
|
|
New Lid Clamp Installation Detail
Date: 08/04/2007
Views: 602
|
|
|
Project Complete
Date: 08/04/2007
Views: 856
|
|
Protex Clamps, Illustrated
Date: 08/06/2007
Views: 683
|
|
Test Preparation, Cleaned Barrel
Date: 09/04/2007
Views: 519
|
|
Test Preparation, Cleaned Lid
Date: 09/04/2007
Views: 495
|
|
|
Test Preparation, Cleaned Fein's Barrel
Date: 09/04/2007
Views: 472
|
|
Test Preparation, New HEPA filter for Fein
Date: 09/04/2007
Views: 557
|
|
Test Preparation: New Filter Installed onto Fein Motor
Date: 09/04/2007
Views: 544
|
|
Test Setup
Date: 09/17/2007
Views: 1127
|
